Training programs,
taught the right way.
McElroy University–certified fusion training, plus specialty joining and pipe-system installation and testing — taught by the team that does it every day. Hands-on classes at our Geismar, Louisiana training center or on the road at your jobsite.
A solid base is the most important part of every fusion joint.
A properly trained fusion tech benefits from learning how to fuse the right way — and your company benefits from fewer mistakes, less rework, and faster completion. Our classes reduce the time needed to get a crew productive, and help you fuse it right the first time.
- Hands-on time on McElroy machines from 1/2″ CTS up to 65″ OD
- Destructive testing methods covered in medium & large diameter classes
- Optional DataLogger 6 and hand-pump training at no additional cost
- Taught in accordance with ASTM F2620 & PPI TN 42-2009
- Certificate of Completion through McElroy University
Section 1 · McElroy University Fusion Training
McElroy-certified fusion, end to end.
IMSCO is a McElroy University Authorized Service Center. Our McElroy-certified instructor teaches in accordance with ASTM F2620 and PPI TN 42-2009. Students earn a Certificate of Completion through McElroy University.
Small diameter
1/2″ CTS – 6″ DIPS
- Hands-on butt fusion across the small-diameter range
- Socket and saddle fusion upon request
- Gas, water, plumbing, irrigation applications
- Entry-level friendly · no prerequisites
Medium diameter
2″ IPS – 20″ OD · including TracStar
- Hand-pump machine training upon request
- DataLogger 6 training included at no additional cost
- Destructive testing methods covered
- Industrial, municipal, oilfield, dredge applications
Large diameter
8″ IPS – 65″ OD · including MegaMc
- Extended hands-on time on large-diameter equipment
- DataLogger 6 training included at no additional cost
- Destructive testing methods covered
- Water transmission, mining, dredging, major industrial
I-Series machines
McElroy I-Series fusion machines
- Operator training on next-gen integrated controls
- Workflow, fault diagnosis, parameter set-up
- DataLogger integration covered
- For crews stepping up to I-Series equipment
DataLogger & Traceability
McElroy DataLogger family
- Joint reporting, weld traceability, project handoff
- Integration with QA programs and audit-ready records
- For operators, foremen, QA, project managers
- Free add-on with medium / large diameter enrollment
Beyond standard butt fusion.
Specialty joining methods needed for service connections, repairs, liners, and dual-containment systems — taught hands-on by IMSCO instructors.
Small Diameter Electrofusion
Electrofusion fittings · service & repair work
- Fitting selection, scraping & prep, processor operation
- Joint inspection & ASTM F1055 best practices
- Gas distribution, water service, repair crews
- IMSCO Certificate of Completion
Hot Air & Extrusion Welding
HDPE liners, geomembranes, dual-contained connections
- Hot air gun and extrusion welder hands-on
- Liner / geomembrane / pond / landfill applications
- Field repairs where butt fusion isn’t an option
- IMSCO Certificate of Completion
Prove the system. Pass the audit.
Joining the pipe is one part of the job. IMSCO also trains on the installation and testing methods that prove a system is ready to go into service — and stay there.
Dual Contained Pipe Systems
Carrier + containment HDPE systems
- Design, fabrication, installation, testing
- Carrier-to-containment alignment & spacing
- Leak detection integration & end terminations
- Industrial, chemical plant, environmental crews
Hydrotesting Procedures
ASTM F2164 hydrostatic testing
- Test plan development & pressurization sequences
- Allowable make-up water calculations
- Leak isolation, documentation, sign-off
- For PMs, QA leads, field supervisors
We host classes at our Geismar, LA location and travel to your jobsite for on-site training. Custom curriculum available for crews and project teams. Don’t see what you need? Ask about custom training.
Eric Gergens.
13+ years in HDPE.
Eric is IMSCO’s McElroy University–certified instructor, trained at McElroy headquarters in Tulsa, Oklahoma. He has been with IMSCO since 2016 and brings more than a decade of field experience across fusion machines, pipe, and liner — for industrial, municipal, oilfield, and dredge work.
The most important part of fusing pipe is a solid base. We teach crews to fuse it right the first time.
What McElroy University qualification does for you
Request training information
Tell us a little about your crew and the diameter range you work in. We’ll get back to you with class options, dates, and pricing — usually within one business day.
- Office: (225) 744-4373
- Email: info@imsupplyco.com
- Address: 36504 Hwy 30, Geismar, LA 70734
Common questions
Where are classes held?
Most classes are hosted at our Geismar, LA training center (36504 Hwy 30). We also travel for on-site training at your yard or jobsite — useful when crews can’t be pulled away or you have a large team to certify.
How long does each class run?
Small and medium diameter classes are two days. Large diameter (8″ IPS – 65″ OD) is a three-day class to allow proper hands-on time with MegaMc and similar equipment.
Do students receive a certification?
Yes — students who complete training receive a Certificate of Completion through McElroy University, including documented results from the testing process.
What standards is the class taught to?
All classes are taught in accordance with ASTM F2620 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings, and PPI TN 42-2009.
Can we add hand-pump or DataLogger 6 training?
Yes. Hand-pump machine training is available on request for medium-diameter classes. DataLogger 6 training is included at no additional cost in medium and large diameter classes.